n features the 700 series connector has a superior ejector with a unique flexible latch. terminals are palladium plated and have an excellent cost performance ratio. the solder dip section is a 0.5 mm (0.020 in.) square and can be used in a f 0.8 mm (0.031 in.) through hole. special strain relief prevents breakage. two kinds of keys and bump polarization prevent incorrect insertion. connectors with 4 mm (0.157 in.) long tails are also available for mounting on multilayer pc boards. n specifications item operating temperature range current rating voltage rating contact resistance insulation resistance dielectric strength insertion force withdrawal force applicable wire applicable wire-wrapping wire applicable pc board (standard) specification C55 c to +105 c dc 1 a ac 250 v 120 m w max. (dc 6 v, 0.1 a) 1000 m w min. (dc 500 v) ac 500 v for 1 minute 3.5 kg max. (10 pins), 21 kg max. (60 pins) 0.25 kg min. (10 pins), 2.5 kg min. (60 pins) flat cable: 1.27 mm (0.050 in.) pitch awg #28 (stranded wires) or awg #30 (solid wire) awg #26 to #30 (solid wire) 1.6 mm (0.062 in.) for standard terminal, 3.2 mm (0.125 in.) for long tail n materials materials polyester (ul94v-0) copper alloy contact terminal gold palladium item insulating material conductor plating fujitsu takamisawa component catalog pc board connectors 700 series
2 700 series d a 8.8 2- f 2.3 e b 2- f 2.5 17.3 1.8 2.54 fcn-705q *l standard tail : 2.5 mm (0.098 in.) 3.6 0.5 *l c 0.3 (0.012) (0.098) (0.090) (0.346) (0.681) (0.020) (0.100) (0.142) (0.071) c a 8.8 4.7 2- f 2.3 e d b 0.64 2.54 3.18 fcn-702q 17.3 13.5 2- f 2.5 0.3 (0.012) (0.098) (0.090) (0.185) (0.346) (0.681) (0.531) (0.025) (0.125) (0.100) header n dimensions (without hook) 1. p (f) type (one side shrouded) [wire-wrap type] c a 7.8 3.52 0.3 (0.012) 2- f 2.3 e d b 2- f 2.5 17.3 0.3 13.5 0.64 (0.025) fcn-702p 2.54 2 (0.079) (0.100) (0.531) (0.681) (0.139) (0.307) (0.098) (0.090) [straight type] [right-angle type] c a 7.8 3.52 2- f 2.3 e d b 2- f 2.5 17.3 0.5 fcn-704p 2.54 *l *l standard tail : 3.0 mm (0.118 in.) long tail : 4.0 mm (0.157 in.) 0.3 (0.012) (0.020) 2 (0.079) (0.100) (0.681) (0.139) (0.307) (0.098) (0.090) 0.3 (0.012) d a 7.8 2- f 2.3 e b 2- f 2.5 17.3 fcn-705p 1.8 *l standard tail : 2.5 mm (0.098 in.) long tail : 4.0 mm (0.157 in.) c 3.6 2.54 0.5 *l 0.3 (0.012) (0.020) (0.100) (0.681) (0.307) (0.098) 0.3 (0.012) (0.142) (0.071) (0.090) unit: mm (in.) unit: mm (in.) unit: mm (in.) 2. q (g) type (both sides shrouded) unit: mm (in.) unit: mm (in.) unit: mm (in.) c a 8.8 4.7 2- f 2.3 e d b 2- f 2.5 17.3 0.5 2.54 3.18 fcn-704q *l *l standard tail : 3.0 mm (0.118 in.) long tail : 4.0 mm (0.157 in.) 0.3 (0.012) (0.098) (0.090) (0.185) (0.346) (0.681) (0.020) (0.125) (0.100) n dimension table number of contacts 10 14 16 20 26 30 34 40 50 60 dimensions (unit: mm (in.) ) a 32.0 (1.25) 37.1 (1.46) 39.6 (1.56) 44.7 (1.76) 52.3 (2.06) 57.4 (2.26) 62.5 (2.46) 70.1 (2.76) 82.8 (3.26) 95.5 (3.76) b 21.8 (.858) 26.9 (1.06) 29.4 (1.16) 34.5 (1.36) 42.2 (1.66) 47.2 (1.86) 52.3 (2.06) 59.9 (2.36) 72.6 (2.86) 85.3 (3.36) c 27.9 (1.09) 33.0 (1.30) 35.5 (1.40) 40.6 (1.60) 48.3 (1.90) 53.3 (2.10) 58.4 (2.30) 66.0 (2.60) 78.7 (3.10) 91.4 (3.60) d 10.16 (0.400) 15.24 (0.600) 17.78 (0.700) 22.86 (0.900) 30.48 (1.20) 35.56 (1.40) 40.64 (1.60) 48.26 (1.90) 60.96 (2.40) 73.66 (2.90) e 18.3 (0.720) 23.4 (0.921) 25.9 (1.02) 31.0 (1.22) 38.6 (1.52) 43.7 (1.72) 48.8 (1.92) 56.4 (2.22) 69.0 (2.72) 81.8 (3.22)
3 700 series n hook form (common to p and q types) f' 27.4 m latch (lock height) (1.08) f 29.95 l latch (1.18) f 17.3 without latch (0.681) n configuration by the number of pins 16 to 60 pins fcn-702, 704, 705p or q 14 pins fcn-702, 704, 705p or q fcn-702, 704, 705f or g 10 pins (bump type) fcn-702, 704, 705p or q 10 pins (clip type) n part numbers standard tail (3.0 mm (0.118 in.) for straight, 2.5 mm (0.098 in.) for right-angle) designation: p for p type header (one side shrouded), q for q type header (both sides shrouded), f for 10-pin bump type header (one side shrouded), g for 10-pin bump type header (both sides shrouded) header type tail length tail type wire-wrap type fcn-702 010-au/0 fcn-702 010-au/l fcn-702 010-au/m fcn-702 014-au/0 fcn-702 014-au/l fcn-702 014-au/m fcn-702 016-au/0 fcn-702 016-au/l fcn-702 016-au/m fcn-702 020-au/0 fcn-702 020-au/l fcn-702 020-au/m fcn-702 026-au/0 fcn-702 026-au/l fcn-702 026-au/m fcn-702 030-au/0 fcn-702 030-au/l fcn-702 030-au/m fcn-702 034-au/0 fcn-702 034-au/l fcn-702 034-au/m fcn-702 040-au/0 fcn-702 040-au/l fcn-702 040-au/m fcn-702 050-au/0 fcn-702 050-au/l fcn-702 050-au/m fcn-702 060-au/0 fcn-702 060-au/l fcn-702 060-au/m number of contacts 10 14 16 20 26 30 34 40 50 60 latch type without latch l latch m latch without latch l latch m latch without latch l latch m latch without latch l latch m latch without latch l latch m latch without latch l latch m latch without latch l latch m latch without latch l latch m latch without latch l latch m latch without latch l latch m latch straight type fcn-704 010-au/0 fcn-704 010-au/l fcn-704 010-au/m fcn-704 014-au/0 fcn-704 014-au/l fcn-704 014-au/m fcn-704 016-au/0 fcn-704 016-au/l fcn-704 016-au/m fcn-704 020-au/0 fcn-704 020-au/l fcn-704 020-au/m fcn-704 026-au/0 fcn-704 026-au/l fcn-704 026-au/m fcn-704 030-au/0 fcn-704 030-au/l fcn-704 030-au/m fcn-704 034-au/0 fcn-704 034-au/l fcn-704 034-au/m fcn-704 040-au/0 fcn-704 040-au/l fcn-704 040-au/m fcn-704 050-au/0 fcn-704 050-au/l fcn-704 050-au/m fcn-704 060-au/0 fcn-704 060-au/l fcn-704 060-au/m right-angle type fcn-705 010-au/0 fcn-705 010-au/l fcn-705 010-au/m fcn-705 014-au/0 fcn-705 014-au/l fcn-705 014-au/m fcn-705 016-au/0 fcn-705 016-au/l fcn-705 016-au/m fcn-705 020-au/0 fcn-705 020-au/l fcn-705 020-au/m fcn-705 026-au/0 fcn-705 026-au/l fcn-705 026-au/m fcn-705 030-au/0 fcn-705 030-au/l fcn-705 030-au/m fcn-705 034-au/0 fcn-705 034-au/l fcn-705 034-au/m fcn-705 040-au/0 fcn-705 040-au/l fcn-705 040-au/m fcn-705 050-au/0 fcn-705 050-au/l fcn-705 050-au/m fcn-705 060-au/0 fcn-705 060-au/l fcn-705 060-au/m straight type fcn-704 010-au/a fcn-704 010-au/b fcn-704 010-au/c fcn-704 014-au/a fcn-704 014-au/b fcn-704 014-au/c fcn-704 016-au/a fcn-704 016-au/b fcn-704 016-au/c fcn-704 020-au/a fcn-704 020-au/b fcn-704 020-au/c fcn-704 026-au/a fcn-704 026-au/b fcn-704 026-au/c fcn-704 030-au/a fcn-704 030-au/b fcn-704 030-au/c fcn-704 034-au/a fcn-704 034-au/b fcn-704 034-au/c fcn-704 040-au/a fcn-704 040-au/b fcn-704 040-au/c fcn-704 050-au/a fcn-704 050-au/b fcn-704 050-au/c fcn-704 060-au/a fcn-704 060-au/b fcn-704 060-au/c long tail (4.0 mm (0.157 in.) for both straight and right-angle) right-angle type (p type only) fcn-705p010-au/a fcn-705p010-au/b fcn-705p010-au/c fcn-705p014-au/a fcn-705p014-au/b fcn-705p014-au/c fcn-705p016-au/a fcn-705p016-au/b fcn-705p016-au/c fcn-705p020-au/a fcn-705p020-au/b fcn-705p020-au/c fcn-705p026-au/a fcn-705p026-au/b fcn-705p026-au/c fcn-705p030-au/a fcn-705p030-au/b fcn-705p030-au/c fcn-705p034-au/a fcn-705p034-au/b fcn-705p034-au/c fcn-705p040-au/a fcn-705p040-au/b fcn-705p040-au/c fcn-705p050-au/a fcn-705p050-au/b fcn-705p050-au/c fcn-705p060-au/a fcn-705p060-au/b fcn-705p060-au/c
4 700 series accessories (polarizing key, lock spring) n dimensions 1.5 0.85 4 part number : fcn-700a1 note : can be ordered in units of 10. (0.059) (0.157) (0.033) 8 4 part number : fcn-700a2 note : dotted lines indicate the section to be snapped off when used. (0.315) (0.157) 15.5 10.6 part number : fcn-700a3 (lock spring) 25.5 7.6 8.7 f 3 (0.342) (0.118) (1.00) (0.417) (0.610) (0.299) unit: mm (in.) unit: mm (in.) unit: mm (in.) n specification of polarity to prevent incorrect insertion ? specify polarity as follows: ? header (pin type, clip type) fcn-705p050-au/m # basic part number common pin number with pin polarity example 00: no polarity when the a2 key is not used, only the basic part number is specified without a suffix. 04: pin 4 is cut or pulled out. position of clip type polarity (see the figure on the right) note: the standard specification is #04 or the end pin number (if the end pin is 50, the specification is 50). ? socket (pin type) fcn-707j050-au/b # basic part number common pin number with pin polarity example 04: fcn-700a1 plugged into pin 4 note: the specification method is the same for idc plugs and through hole sockets. s s s s s fcn-700a2 on both sides fcn-700a2 on only one side opposite the triangle mark ( ) # a # b (header) (socket) #01 fcn-700a1 plugged into pin 1 n mounting hole layout b 0.1(.004) d 0.2(.008) 10~15 (0.939~0.590) 0.74 (.029) 0.1(.004) 2.54 (.100) 0.1(.004) 3.6 (0.142) x f 2.8 (0.110) hole f 0.8(.304) 0.06 (.002) hole edge of pc board header (right-angle p and q type) header (straight, wire-wrap q type) c 0.1(.004) d 0.2(.008) 1.52 (.060) 0.1(.004) 2.54 (.10) 0.1(.004) 4.7 (0.185) f 0.8(.304) 0.06(.002) hole for straight tail f 1.0 (0.039) 0.06(.002) hole for wire-wrap tail f 2.8 (0.110) hole x note : when inserting a 720 series cover, mounting holes should be located less than 9 mm (0.354 in.) from the edge of the pc board. with l latch : 30.48 mm (1.20 in.) min. with m latch, without latch : 22.86 mm (0.900 in.) min. for x see the table on the preceding page for the dimensions. c 0.1(.004) d 0.2(.008) 1.52 (.060) 0.1(.004) 2.54 (.100) 0.1(.004) 3.52 (0.139) f 0.8 (0.304) 0.06(.002) hole for straight tail f 1.0 (0.039) 0.06(.002) hole for wire-wrap tail f 2.8 (0.110) hole x socket (straight type) 40.46 (1.593) 0.2(.008) 2.54 (.100) 0.1(.004) f 0.8 (0.304) 0.06(.002) hole 7.5 (0.295) min. header (straight, wire-wrap p type) when mated with a 700 series header, the header's pitch should be used. unit: mm (in.) notes: ? see the next page for cable termination. ? see the next page for idc tools. ? the last digit (0) of the part number is zero. ? use tapping screws jis b1122, 2.5x6 to mount a straight connector on pc boards.
|
